
ActiveIO-LinkPressure sensorsOrder code: 6H0801014
SEH-C4-1/4GA-APN6D-SCSEH-C4-1/4GA-APN6D-SC IO-Link pressure sensor
SEH-C4-1/4GA-APN6D-SC is an IO-Link pressure sensor with a display, a 0-250 bar measuring range, 500 bar maximum overload pressure, 0.5% accuracy, a G1/4 male thread and an M12 A-coded 5-pin connector. It provides two switching outputs and one 4–20 mA analog output, a mirrored 4-digit display, a 300° rotatable upper housing, a stainless-steel housing and IP65 protection. Parameters can be set using buttons or IO-Link.
IO-LinkPressure sensorsM12PNPNPN







Features
IO-Link pressure sensor
Large 4-digit display, mirrored, semi-transparent design
Upper housing rotatable by 300°
Configurable normally open/normally closed, PNP/NPN/push-pull, hysteresis/window modes
Two switching outputs and one analog output
One-piece molded display-panel housing
Stainless-steel main housing
M12 A-coded 5-pin connector
Key lock and intuitive button menu
Parameter setting via buttons or IO-Link
Specifications
- Operating voltage
- 24VDC ± 10%
- Operating current
- < 100mA
Pressure parameters
- Measuring range
- 0...250 bar (0...25 Mpa)
- Admissible overpressure
- 500 bar
- Electrical connection
- M12 A-coded;5-pin
- Accuracy
- 0.5%
Output parameters
- OUT1 signal
- switching output;IO-Link(auto wake-up)
- OUT2 signal
- switching output
- Output function
- NPN/PNP/Push-Pull;NO/NC;Hysteresis/Window programmable
- Digital output current
- 250mA
- Set point SP
- 1.2 bar...250 bar
- Reset point rP
- 0 bar...248.8 bar
- Minimum SP-rP separation
- 1.2 bar (0.5%F.S*)*F.S:Full Scale of measuring range (e.g: measuring range = -1 ... 6 bar, F.S = 7)
- Resolution
- 0.1 bar
- Analogue output
- 4...20mA
- Max.load
- 500Ω
- Analogue output accuracy
- 0.5%F.S
- Minimum separation between analogue start and end points
- 50 bar (20%F.S)
IO-Link
- Vendor ID
- 1317 (0x0525)
- Device ID
- 198673 (0x030811)
- Number of interfaces
- 1
- IO-Link version
- V1.1
- IO-Link input bytes
- 2 bytes (16Bit)
- Frame type
- TYPE_2_2
- Transmission type
- COM2 38.4kbit/s
- Minimum cycle time
- 2400 us
- ISDU(Indexed Service)
- Supported
- Block parameter operation
- Not supported
- Data storage(DS)
- Not supported
- Ambient temperature
- -40...80℃
- Protection
- IP65
Documents
Configuration fileVersion IODD 1.1 / 2026-08-20
SEH-C4-1/4GA-APN6D-SC IODD file
For models: SEH-C4-1/4GA-APN6D-SCOrder codes: 6H0801014Updated: 2026-09-07Size: 35.2 KB
CAD drawing (DWG)
SEH-C4-1/4GA-APN6D-SC CAD drawing (DWG)
For models: SEH-C4-1/4GA-APN6D-SCOrder codes: 6H0801014Updated: 2026-09-07Size: 120.7 KB
3D model (STP)
SEH-C4-1/4GA-APN6D-SC 3D model (STP)
For models: SEH-C4-1/4GA-APN6D-SCOrder codes: 6H0801014Updated: 2026-09-07Size: 1.3 MB
Datasheet
SEH-C4-1/4GA-APN6D-SC datasheet
For models: SEH-C4-1/4GA-APN6D-SCOrder codes: 6H0801014Updated: 2026-10-24Size: 0.29 MiB
Accessories
Accessories and connectivity
Published accessory products; open any of them for full details.
Compare models in this series
All Pressure sensors (57)| Model | Operating voltage | Electrical connection | Measuring range | IO-Link version | View details | |
|---|---|---|---|---|---|---|
![]() | SEH-C4-1/4GA-APN6D-SCThis model | 24VDC ± 10% | M12 A-coded;5-pin | 0...250 bar (0...25 Mpa) | V1.1 | |
![]() | SEH-C4-1/4GA-LI6D-SCSame series | 24VDC ± 10% | M12 A code 4-pin | 0-250 bar (0-25Mpa) | V1.1 | → |
![]() | SEH-C3-1/4GA-LI6D-SCSame series | 24VDC ± 10% | M12 A code 4-pin | 0-160 bar (0-16Mpa) | V1.1 | → |
![]() | SEH-C5-1/4GA-APN6D-SCSame family · differs only in measuring range | 24VDC ± 10% | M12 A-coded;5-pin | 0...400 bar (0...40 Mpa) | V1.1 | → |

