
ActiveIO-LinkPressure sensorsOrder code: 6H1701074
SEH-AE-1/4GA-LI6D-SCSEH-AE-1/4GA-LI6D-SC IO-Link pressure sensor
SEH-AE-1/4GA-LI6D-SC is a IO-Link pressure sensor with a mirrored 4-digit display, a 300° rotatable upper housing, stainless-steel housing and configurable outputs for industrial applications. Parameters can be set using buttons or IO-Link.
IO-LinkPressure sensorsM12PNPNPN







Features
IO-Link pressure sensor
Large 4-digit display, mirrored, semi-transparent design
Upper housing rotatable by 300°
Configurable normally open/normally closed, PNP/NPN/push-pull, hysteresis/window modes
Configurable switching/analog or switching/IO-Link output
One-piece molded display-panel housing
Stainless-steel main housing
M12 A-coded 4-pin connector
Key lock and intuitive button menu
Parameter setting via buttons or IO-Link
Configurable analog output start and end points
Specifications
- Operating voltage
- 24VDC ± 10%
- Operating current
- < 100mA
Pressure parameters
- Measuring range
- -1-10 bar (-0.1-1Mpa)
- Max overvoltage
- 20 bar
- Interface type
- M12 A code 4-pin
- Accuracy
- 0.5%
Output parameters
- OUT1 Signal
- Switching signal or IO-Link (automatic wake-up)
- OUT2 Signal
- Switching signal or 4-20mA or 20-4mA
- Switching signal output type
- NPN/PNP/Push-Pull, NO/NC, Hysteresis/Window programmable
- Switching signal output current
- 250mA
- Switch point SP setting range
- -0.95bar-10bar
- Release point rP setting range
- -1bar-9.95bar
- Minimum interval between SP and rP points
- 0.05 bar (0.5%F.S*)*F.S:Measuring range full scale (e.g. measuring range -1-6bar, then F.S=7)
- Switching signal output resolution
- 0.01 bar
- Analog signal output maximum load
- 500Ω
- Analog signal output accuracy
- 0.5%F.S
- Minimum interval between analog signal start and end points
- 2.2 bar (20%F.S)
IO-Link
- Vendor ID
- 1317 (0x0525)
- Device ID
- 198673 (0x030811)
- Number of interfaces
- 1
- IO-Link protocol version
- V1.1
- IO-Link input bytes
- 2 bytes (16Bit)
- Frame type
- TYPE_2_2
- Transmission rate
- COM2 38.4kbit/s
- Minimum cycle time
- 2400 us
- ISDU(Indexing Service)
- Support
- Block parameter operations
- Not support
- Data storage(DS)
- Not support
- Operating temperature
- -40-80℃
- Protection class
- IP65
Documents
Configuration fileVersion IODD 1.1 / 2026-08-20
SEH-AE-1/4GA-LI6D-SC IODD file
For models: SEH-AE-1/4GA-LI6D-SCOrder codes: 6H1701074Updated: 2026-08-20Size: 35.2 KB
CAD drawing (DWG)
SEH-AE-1/4GA-LI6D-SC CAD drawing (DWG)
For models: SEH-AE-1/4GA-LI6D-SCOrder codes: 6H1701074Updated: 2026-08-20Size: 120.7 KB
3D model (STP)
SEH-AE-1/4GA-LI6D-SC 3D model (STP)
For models: SEH-AE-1/4GA-LI6D-SCOrder codes: 6H1701074Updated: 2026-08-20Size: 1.3 MB
Datasheet
SEH-AE-1/4GA-LI6D-SC datasheet
For models: SEH-AE-1/4GA-LI6D-SCOrder codes: 6H1701074Updated: 2026-10-25Size: 0.43 MiB
Accessories
Accessories and connectivity
Published accessory products; open any of them for full details.
Compare models in this series
All Pressure sensors (57)| Model | Operating voltage | Electrical connection | Measuring range | IO-Link version | View details | |
|---|---|---|---|---|---|---|
![]() | SEH-AE-1/4GA-LI6D-SCThis model | 24VDC ± 10% | M12 A code 4-pin | -1-10 bar (-0.1-1Mpa) | V1.1 | |
![]() | SEH-AE-1/4GA-APN6D-SCSame series | 24VDC ± 10% | M12 A-coded;5-pin | -1...10 bar (-0.1...1 Mpa) | V1.1 | → |
![]() | SEH-AD-1/4GA-LI6D-SCSame family · differs only in measuring range | 24VDC ± 10% | M12 A code 4-pin | -1-6 bar (-0.1-0.6Mpa) | V1.1 | → |
![]() | SEH-B7-1/4GA-APN6D-SCSame series | 24VDC ± 10% | M12 A-coded;5-pin | 0...10 bar (0...1 Mpa) | V1.1 | → |

