
ActiveIO-LinkLevel sensorsOrder code: 401021074.5
LTH-G1/2N-LI6D-SC/L500LTH-G1/2N-LI6D-SC/L500 IO-Link level/temperature sensor
An IO-Link level/temperature sensor for improved data transfer, remote diagnostics, and efficient control.
IO-LinkLevel sensorsM12PNPNPN







Features
IO-Link level/temperature sensor
4-digit large digital display with mirroring and semi-transparent design
Rotatable upper housing (300°)
Selectable NO/NC, PNP/NPN, push-pull, hysteresis, or window functions
Selectable switching/analog or switching/IO-Link outputs
One-piece display-panel housing
Stainless-steel main housing
M12 A-coded 4-pin connector
Button lock and simple button-menu operation
Parameters configurable by buttons or IO-Link
Configurable analog-output start and end points
Specifications
- Operating voltage
- 24VDC ± 10%
- Operating current
- < 200mA
Temperature parameters
- Measuring range
- -50℃ - 150℃
- Interface type
- M12, A-coded, 4-pin
- Measuring element
- PT1000
- Temperature measurement accuracy
- 0.5℃
Liquid level parameters
- Lxxx customization range
- L250 and L500 are standard products, and the remaining customized lengths start from 250mm Start to increase exponentially in units of 40mm, such as 290, 330, 370... When it exceeds 500mm, it will be multiplied by 40mm starting from 500mm. increasing, such as 540, 580, 620...
- Measuring range
- 40-(Lxxx-40) mm
- Interface type
- M12, A-coded, 4-pin
- Measuring element
- Magnetic resistance
- Measurement accuracy
- 5mm (only for L250 and L500, other customized length accuracy is 10mm)
- Float material
- NBR 17.5x25mm
Output parameters
- OUT1 Signal
- Temperature switching signal or IO-Link (automatic wake-up)
- OUT2 Signal
- Liquid level switching signal or liquid level 4- 20mA or 20-4mA
- Switching signal output type
- NPN/PNP/Push-Pull, NO/NC, Hysteresis/Window programmable
- Switching signal output current
- 250mA
- Switch point SP1 setting range
- -49.8℃-150℃
- Release point rP1 setting range
- -50℃-149.8℃
- Switch point SP2 setting range
- 45mm - (Lxxx-40)mm
- Release point rP2 setting range
- 40mm - (SP2-5)mm
- Temperature switching signal output resolution
- 0.1℃
- Analog signal output maximum load
- 500Ω
- Analog signal output accuracy
- 0.5%F.S
- Minimum interval between analog start and end points
- 50mm
IO-Link
- Vendor ID
- 1317 (0x0525)
- Device ID
- 198929 (0x030911)
- Number of interfaces
- 1
- IO-Link protocol version
- V1.1
- IO-Link input bytes
- 4 bytes(32Bit)
- Frame type
- TYPE_2_V
- Transmission rate
- COM2 38.4kbit/s
- Minimum cycle time
- 3400us
- ISDU(Indexing Service)
- Support
- Block parameter operations
- Not support
- Data storage (DS)
- Support
- Operating temperature
- -40-80℃
- Protection temperature
- IP65
Documents
Configuration fileVersion IODD 1.1 / 2024-10-18
LTH-G1/2N-LI6D-SC/L500 IODD file
For models: LTH-G1/2N-LI6D-SC/L500Order codes: 401021074.5Updated: 2026-08-20Size: 43.2 KB
Datasheet
LTH-G1/2N-LI6D-SC/Lxxx datasheet
For models: LTH-G1/2N-LI6D-SC/L250 / LTH-G1/2N-LI6D-SC/L500Order codes: 401021074.3 / 401021074.5Updated: 2026-10-25Size: 0.45 MiB
Accessories
Accessories and connectivity
Published accessory products; open any of them for full details.
Compare models in this series
All Level sensors (2)| Model | Operating voltage | IO-Link version | IO-Link input bytes | Temperature accuracy | View details | |
|---|---|---|---|---|---|---|
![]() | LTH-G1/2N-LI6D-SC/L500This model | 24VDC ± 10% | V1.1 | 4 bytes(32Bit) | 0.5℃ | |
![]() | LTH-G1/2N-LI6D-SC/L250Same specifications | 24VDC ± 10% | V1.1 | 4 bytes(32Bit) | 0.5℃ | → |

